Svetlana Polukoshko, Andris Martinovs, Svetlana Sokolova


This paper deal with shock and vibration insulators, which usually are performed from the elastomeric (rubber-like) materials. Elastomeric materials give many engineering advantages due to their capability of absorbing input energy much better than engineering materials, high elasticity, good dynamic properties, low volume compressibility, a linear relationship between stress and strain up to strain of 15% ÷ 20%, resistance to aggressive environmental factors. Elastomeric materials are widely used in machine building, shipbuilding, civil engineering, aviation and aerospace as compensation devices, vibration dampers, shock absorbers. Laminated elastomers, consisting of interleaved thin layers of elastomer and rigid reinforcing layers are also successfully used as bearing, joints, dampers, compensating devices, shock-absorbers. Such structures have many advantages: ability to endure high stress (>200 MPa), ease of maintenance, non- necessity for lubrication, vibration and noise reduction, ability to work in a very dirty, dusty, abrasive environment. The disadvantage of elastomeric material are aging, i.e. changing its properties over time. In this paper the influence of aging of elastomeric materials on the damping properties of shock absorbers is considered based on the mechanical models of elastomers - Maxwell and Burgers modes. Fatigue endurance, i.e. the ability to withstand mechanical actions for a long time is studied based on experiments on dynamic shear with laminated rubber-metal structures. The experiments show that such structures have a very high fatigue life - up to 100 million cycles.


elastomers; shock and vibration protection; aging; Burgers model; Maxwell model; fatigue

Full Text:



A. N. Gent, Engineering with Rubber: How to Design Rubber Components. Munich, Carl Hanser Verlag, 2011.

W. L. Hinks, Randolph Research Co. (RRC). Laminated-rubber bearings: heavy duty composites for aerospace and undersea. Presentation at the Spring 2013 183rd Technical Meeting of the Rubber Division of the American Chemical Society. [Online]. Available on:

J. T. Bauman, Fatigue, Stress and Strain of Rubber Components: Guide for Design Engineers. Munich, Carl Hanser Verlag, 2008.

J. M. Kelly and D. A. Konstantinidis, Mechanics of Rubber Bearings for Seismic and Vibration Isolation. UK: John Wiley & Sons, 2011.

D. A. Konstantinidis and J. M. Kelly, Advances in Low-Cost Seismic Isolation with Rubber. Proceedings of the 10th U.S. National Conference in Earthquake Engineering, July 21-25, 2014, Earthquake Engineering Research Institute, Anchorage, Alaska, [Online]. Available on: https://www.

V. A. Lepetov, Rubber Technical Products. (Резино-технические изделия). Moscow, Chemistry, 1972. (In Russian)

V. T Lyapunov, E. E Lavendel and S. A Shlyapochnikov, Rubber vibration isolators: Habdbook, (Резиновые виброизоляторы: Справочник) Leningrad: Sudostrojenie, 1988. (In Russian).

A. R. Bhuiyan; A. F. M. S. Amin; T. Hossain; and Y. Okui “Nonlinear viscosity law for rate-dependent response of high damping rubber: FE implementation and verification”, in Constitutive Models for Rubber V – Boukamel, Laiarinandrasana, Meo & Verron (eds), Taylor & Francis Group, London, 2008, pp. 279 - 284.

V.N. Poturaev and V.I. Dyrda, Rubber Machine Elements. (Резиновые детали машин), Mashinostrojenie, Moscow, 1977. (in Russian)

A. R. Bhuiyan Y. Okui , H. Mitamurab and T. A. Imaic, Rheology Model of High Damping Rubber Bearings for Seismic Analysis: Identification of nonlinear viscosity, International Journal of Solids and Structures. 46 (2009),

–1792, [Online]. Available on:



  • There are currently no refbacks.

SCImago Journal & Country Rank