DEVELOPING LATHES POSTPROCESSOR GENERATING CYCLES OF PROCESSING GROOVES

Authors

  • Tsvetan Kaldashev Technical university of Sofia (BG)

DOI:

https://doi.org/10.17770/etr2019vol3.4186

Keywords:

CNC, postprocessor, canned cycle

Abstract

This article explores the possibility of developing a post-processor generating circles for radial and facsimile grooves in PTC Creo environments using a generalized postprocessor G-POST and a specialized language FIL (Factory Interface Language). The proposed development approach can also be applied to post-processor generating cycles for rough and fine turning (G71, G72 and G70).

Downloads

Download data is not yet available.

References

Doosan Puma series, Programming manual, MXTTPGE68;

FIL Help V6.6;

HJ. Patthi Bin Hussain, Zhu Yuesheng, Murthy Rallapalli and J.Mahmud, Development of Post Processor for Dual-Spindle Turning Center, Applied Mechanics and Materials, 2014, Vols. 541-542, pp 804-807, ISSN 1662-7482;

Čuboňová, N., Postprocessing of cl data in CAD/CAM system edgecam using the constructor of postprocessors, Manufacturing Technology, Vol. 13, Iss. 2, 2013, pp 158-164, ISSN 1213-2489;

Hadjiiski, P. I., Kaldashev, T. P., Creation of lether postprocessor generate repeated cycle in an environment of Pro/Engineer, International scientific conference-FIT 2012, pp. 245-249, 2012, Bulgaria, ISBN 978-954-438-994-9.

Downloads

Published

2019-06-20

Issue

Vol. 3 (2019): Environment. Technology. Resources. Proceedings of the 12th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

How to Cite

[1]
T. Kaldashev, “DEVELOPING LATHES POSTPROCESSOR GENERATING CYCLES OF PROCESSING GROOVES”, ETR, vol. 3, pp. 74–76, Jun. 2019, doi: 10.17770/etr2019vol3.4186.