POSTPROCESSOR AND MACRO PROGRAM FOR CALCULATION OF THE DISPLACEMENTS OF THE WORKING COORDINATE SYSTEMS WHEN WORKING BY THE METHOD 3 + 2 AXES

Tsvetan Kaldashev

Abstract


Тhis article discusses the possibility of developing a postprocessor and macro program for automatic calculation and input of the displacements in the working coordinate systems when working by the method 3 + 2 axes. The ability to take the information from the CL Data file and its subsequent use by a macro program for certain calculations is used. For this purpose, a generalized G-POST postprocessor and a specialized FIL language are used.


Keywords


CNC, 3+2 axis, postprocessor, Euler angles

Full Text:

PDF

References


Haas Mill Operator’s manuals, Next Generation Control 96-8210 Revision F December 2017 English

Mazatrol SmoothX Programming manuals, EIA/ISO program, 2019

Hadjiiski P., Programming of CNC machine tools, Tehnical university of Sofia, 2010, ISBN 978-954-438-865-2A

Ben Groves, Macro B programming manual

Slavov, S., Dimitrov, D., Iliev, I., Variability of regular relief cells formed on complex functional surfaces by simultaneous five-axis ball burnishing, (2020) UPB Scientific Bulletin, Series D: Mechanical Engineering, 82 (3), pp. 195-206.




DOI: https://doi.org/10.17770/etr2021vol3.6512

Refbacks

  • There are currently no refbacks.


SCImago Journal & Country Rank