THE EFFECT OF FEED RATE AND CUTTING SPEED TO SURFACE ROUGHNESS DURING HOLE BORING OF ALUMINUM WITH ANTI-VIBRATION BORING BAR

Sabi Sabev, Plamen Kasabov

Abstract


this study is focusing on the experimental investigation of the effects of cutting parameters on surface roughness during hole boring of 8062 aluminums with anti-vibration boring bar on lathe. Several experiments were conducted with different cutting conditions. Based on the results and using “Minitab 19” software, a mathematic model was made to predict the surface quality in connection with different cutting conditions. Finally, an experiment analysis was carried out to verify the analytical results.

 


Keywords


anti-vibration, boring bar, DOE, lathe

Full Text:

PDF

References


David J. Whitehouse, Surfaces and Their Measurement. Book • 2002 https://doi.org/10.1016/B978-1-903996-01-0.X5000-2

Zurita-HurtadoO. J., Di Graci-TiralongoV. C., & Capace-AguirreM. C. (2017). Effect of surface hardness and roughness produced by turning on the torsion mechanical properties of annealed AISI 1020 steel. Revista Facultad De Ingeniería Universidad De Antioquia, (84), 55-59.

https://doi.org/10.17533/udea.redin.n84a07

Kumar NS, Shetty A, Shetty A, Ananth K, Shetty H (2012) Effect of spindle speed and feed rate on surface roughness of Carbon Steels in CNC turning. Procedia Engineering 38: 691-697.

https://doi.org/10.1016/j.proeng.2012.06.087

J.D. ThieleandS.N. Melkote,“Effect of cutting edge geometry and work-piece hardness on surface generation in the finish hard turning of AISI 52100 steel,”Journal of MaterialsProcessing Technology, vol. 94, 1999, pp. 216-226.

W.Chen, “Cutting forces and surface finish when machining mediumhardness steel using CBN tools,” International Journal of Machine Tools Manufacturing, vol. 40, 2000, pp. 455-466.

S.M. Darwish,“Theimpact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy,” Journal of Materials Processing Technology,Vol. 97, 2000, pp. 10-18.

Samya Dahbi, Haj El Moussami, Latifa Ezzine. Optimization of turning parameters for surface rough-ness. Xème Conférence Internationale: Conception et Production Intégrées, Dec 2015, Tanger. https://hal.archives-ouvertes.fr/hal-01260818

M. Nurhaniza, M. K. A. M. Ariffin, F. Mustapha, B. T. H. T. Baharudin, "Analyzing the Effect of Machining Parameters Setting to the Surface Roughness during End Milling of CFRP-Aluminium Composite Laminates", International Journal of Manufacturing Engineering, vol. 2016, Article ID 4680380, 9 pages, 2016. https://doi.org/10.1155/2016/4680380

C. Rao, D. Rao, P. Srihari Influence of cutting parameters on cutting force and surface finish in turning operation Procedia Eng., 64 (2013), pp. 1405 1415 https://doi.org/10.1016/j.proeng.2013.09.222




DOI: https://doi.org/10.17770/etr2021vol3.6537

Refbacks

  • There are currently no refbacks.


SCImago Journal & Country Rank