CONSEQUENCES OF THE BASIC LAW OF FLAT INTERLOCKING OF INVOLUTE CYLINDRICAL GEARS

Authors

  • Genadi Cvetanov Department of Mechanical and Precision Engineering, Technical University of Gabrovo (BG)
  • Tsanko Karadzhov Department of Mechanical and Precision Engineering, Technical University of Gabrovo (BG)

DOI:

https://doi.org/10.17770/etr2021vol3.6576

Keywords:

possibilities of generation, involute cylindrical gears, asymmetric profile

Abstract

Three consequences based on the basic law of the flat interlocking have been determined that allow the generation of asymmetric tooth profile on different poloidal circles. Gears with asymmetric profile are used in both mechanical engineering and measuring devices. Qualitative indicators of engagement that cannot be accomplished with a symmetric profile have been developed. A specific example of generation III has been presented. The qualitative indicators of engagement, which are invariant to the parameters of the tool, have been improved.

Downloads

Download data is not yet available.

References

E. B. Vulgakov, Soosnyye zubchatyye peredachi – Spravochnik, Moskva: Mashinostroyeniye, 1987.

E. B. Vulgakov, Teoriya evol'ventykh zubchatykh peredach, Moskva: Mashinostroyeniye, 1995.

E. B. Vulgakov, Zubchatyye peredachi s uluchshennymi svoystvami – Obobshchennaya teoriya i proyektirovaniye, Moskva: Mashinostroyeniye, 1975.

E. B. Vulgakov and V. M. Ananyev, "Avtomatizirovannoye proyektirovaniye soosnoy peredachi," Vestnik mashinostroyeniya, no. 5, 1986.

D. Dichev, R. Miteva, I. Zhelezarov and D. Diakov, "A model of the dynamic error in the devices for measuring moving objects parameters," in 45th International Conference on Application of Mathematics in Engineering and Economics, AMEE 2019, Sozopol, 2019, DOI: 10.1063/1.5133593

D. Dichev, F. Kogia, H. Nikolova and D. Diakov, "A Mathematical Model of the Error of Measuring Instruments for Investigating the Dynamic Characteristics," Journal of Engineering Science and Technology Review, vol. 11, no. 6, pp. 14-19, 2018, DOI: 10.25103/jestr.116.03

C. G. Conev and K. S. Davidov, "Investigation Of The Influence On Additional Mounted On Barrel Edge Concentrated Mass Over The Grouping Of Gunshot Hits In Single Shooting," in 21st International Conference The Knowledge – Based Organization, Sibiu Romania, 2015, ISSN 1843-6722

I. N. Bronshteyn and K. A. Semendyayev, Spravochnik po matematike dlya inzhenerov i uchashchikhsya VTUZOV, Moskva: Nauka, 1986.

S. Simeonov and G. Tsvetanov, "Theorem for reversing the direction of the involute cylindrical gears with asymmetric profile of teeth," Gabrovo, 2005, ISSN 1310-6686

S. Simeonov and G. Tsvetanov, "Theorem for reversing the direction of the involute cylindrical gears with asymmetric profile of teeth," Mechanics of machines, no. 63, 2005, ISSN 0861-9727

L. Lazov, E. Teirumnieks, N. Angelov and E. Teirumnieka, "Methodology for Automatic Determination of Contrast of Laser Marking for Different Materials," in Proceedings of the 12th International Scientific and Practical Conference, Rezekne Latvia, 2019, DOI: 10.17770/etr2019vol3.4143

Downloads

Published

2021-06-16

How to Cite

[1]
G. Cvetanov and T. Karadzhov, “CONSEQUENCES OF THE BASIC LAW OF FLAT INTERLOCKING OF INVOLUTE CYLINDRICAL GEARS”, ETR, vol. 3, pp. 54–57, Jun. 2021, doi: 10.17770/etr2021vol3.6576.