MODELING THE OPERATION OF A GALVANIC BATH WITH ELECTRIC HEATERS AND OPTIMIZING ITS DESIGN BASED ON NUMERICAL SIMULATION

Authors

  • Alexander Samarkin Institute of Medicine and Biology Pskov State University Pskov (RU)
  • Sergey Dmitriev Institute of Engineering Sciences Pskov State University Pskov (RU)
  • Alexander Dementyev Institute of Engineering Sciences Pskov State University (RU)
  • Evgeniya Evgenyeva Institute of Engineering Sciences Pskov State University (RU)
  • Elena Samarkina Institute of Engineering Sciences Pskov State University (RU)

DOI:

https://doi.org/10.17770/etr2021vol3.6581

Keywords:

automated controls, computed fluid dynamics, finite element analysis

Abstract

A model of the processes in a galvanic bath during heating is based on the finite element method. The processes of heating the air chamber and directly the reagent solution are simulated. Based on the constructed model, an automatic control system for heating elements is being developed, which provides a sufficient heating rate, a stable temperature and protects the heating elements from burnout. An application program has been created that allows performing the calculations without studying complex modeling systems.

 

Downloads

Download data is not yet available.

References

M. Hejfec, V. Borodavko, V. Ivashko, and S. Klimenko, Obrabotka i uprochnenie poverhnostej pri izgotovlenii i vosstanovlenii detalej: LitRes, 2021. [Online]. Available: https://books.google.ru/books?id=DFsVEAAAQBAJ

ELEKTRONAGREVATELI TRUBCHATYE, 13268-88, GOSUDARSTVENNYJ STANDART SOYUZA SSR, M., 01/01/90.

SPLAVY PRECIZIONNYE, 10994-74, MEZHGOSUDARSTVENNYJ STANDART, M., 01/01/75.

V. Sheleg, K. avtorov, and M. Kane, Tekhnologiya mashinostroeniya. Kursovoe proektirovanie: LitRes, 2017. [Online]. Available: https://books.google.ru/books?id=TI0QDQAAQBAJ

V. YAkuhin, Vysokotekhnologichnye metody metalloobrabotki. Uchebnik: Izd-vo MGIU, 2011. [Online]. Available: https://books.google.ru/books?id=sdZbma80B9oC

P. D. Bates, S. N. Lane, and R. I. Ferguson, Computational fluid dynamics: Applications in environmental hydraulics. Hoboken, NJ: J. Wiley, 2010. [Online]. Available: http://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&db=nlabk&AN=138344

M. Tabatabaian, COMSOL for engineers. Dulles, VA: Mercury Learning and Information, 2014. [Online]. Available: http://search.ebscohost.com/login.aspx?direct=true&scope=site&db=nlebk&AN=1809110

R. W. Pryor, Multiphysics modeling using COMSOL5 and MATLAB. Dulles: Mercury Learning and Information, 2016.

N. V. Sahinidis, “Mixed-integer nonlinear programming 2018,” Optim Eng, vol. 20, no. 2, pp. 301–306, 2019, doi: 10.1007/s11081-019-09438-1.

Downloads

Published

2021-06-16

Issue

Vol. 3 (2021): Environment. Technology. Resources. Proceedings of the 13th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

How to Cite

[1]
A. Samarkin, S. Dmitriev, A. Dementyev, E. Evgenyeva, and E. Samarkina, “MODELING THE OPERATION OF A GALVANIC BATH WITH ELECTRIC HEATERS AND OPTIMIZING ITS DESIGN BASED ON NUMERICAL SIMULATION”, ETR, vol. 3, pp. 330–335, Jun. 2021, doi: 10.17770/etr2021vol3.6581.