GEOMETRIC SYNTHESIS OF INVOLUTE PLANETARY GEARS WITH CONNECTED GEAR WHEELS OF TYPE 2K-H
DOI:
https://doi.org/10.17770/etr2021vol3.6643Keywords:
planetary involute cylindrical tooth gears, asymmetric profileAbstract
Based on the basic law of flat interlocking, the paper considers a possibility of increasing the gear ratio of low module involute cylindrical planetary gears by using asymmetric tooth profile for the purposes of measuring devices. An example of the synthesis of such reduction gearing by optimal choice of asymmetry between the profiles and Possibility of generation III is presented. Also presented is a planar matching of the unconditional existence areas in the field of independent coefficients of instrument displacement by the straight optimization method and pre-set qualitative indicators of the gearing.
Downloads
References
E. B. Vulgakov, Teoriya evolyventayh zubchatayh peredach, Moskva: Mashinostroenie, 1995.
E. B. Vulgakov, Soosnaye zubchataye peredachi. Spravochnik, Moskva: Mashinostroenie, 1987.
Spravochnik po geometricheskomu raschetu evolyventayh zubchatayh i chervyachnayh peredach, I. A. Bolotovskogo ed., Moskva: Mashinostroenie, 1986.
S. Simeonov and G. Tsvetanov, "Theorem for reversing the direction of the involute cylindrical gears with asymmetric profile of teeth," Mechanics of machines, no. 63, 2005, ISSN 0861-9727
S. Simeonov and G. Tsvetanov, "Theorem for reversing the direction of the involute cylindrical gears with asymmetric profile of teeth," Proceedings of the Technical University of Gabrovo, no. 32, 2005, ISSN 1310-6686
D. Dichev, H. Koev, T. Bakalova and P. Louda, "A model of the dynamic error as a measurement result of instruments defining the parameters of moving objects," Measurement Science Review, vol. 14, no. 4, pp. 183-189, 2014, DOI: 10.2478/msr-2014-0025
D. Dichev, H. Koev, T. Bakalova and P. Louda, "An algorithm for improving the accuracy of systems measuring parameters of moving objects," Metrology and Measurement Systems, vol. 23, no. 4, pp. 555-565, 2016, DOI: 10.1515/mms-2016-0041
L. Lazov, E. Teirumnieks, N. Angelov and E. Teirumnieka, "Methodology for Automatic Determination of Contrast of Laser Marking for Different Materials," in Proceedings of the 12th International Scientific and Practical Conference, Rezekne Latvia, 2019, DOI: 10.17770/etr2019vol3.4143
X. Zhao and A. Vacca, "Formulation and optimization of involute spur gear in external gear pump," Mechanism and Machine Theory, vol. 117, pp. 114-132, November 2017, DOI: 10.1016/j.mechmachtheory.2017.06.020
C. G. Conev and K. S. Davidov, "Analytical Model For Approximately Calculating Of The Second Frequency Of Cross Vibrations For Complex Shape Barrel Of The Small ARM," in The 21st International Conference The Knowledge – Based Organization, Sibiu Romania, 2015, ISSN 1843-6722
