CLEANED WATER QUALITY IN THE EXPERIMENTAL CIRCUIT LABORATORY

Agnese Grisone, Edmunds Teirumnieks

Abstract


For the moment there is no problem, because the clean water complies with the following requirements. But it is the nature of the mechanical problems, where technical and cleaned water in the production process increased conductivity indicators and the pH value is less than the soft water after legislative dossier. Materials and methods are described in the clean water sampling physical – chemical testing, as well as describes the methods used. And you are prompted to create the electricity supply system, which, in addition to the accidental or unplanned power off position. It will depend on the results of a number of indicators. You can view a version of the technology, if not improving, the ability to create an automatic power supply system.

Keywords


Cleaned water; cleaned water quality

Full Text:

PDF

References


A. Putniņa, Instrukcija ITK EKI–IEI–06, 08.08.2013., Dok. Nr. DKI9.049.016/3

Paraugu noņemšana fizikāli - ķīmiskai testēšanai

A. Zemcova, Kvalitātes specifikācija „Ūdens, attīrīts”, 30.11.2012., Dok. Nr. KIS7.028.003/8

Dz. Doķe, Analīzes metode „Ūdens, attīrīts”, 19.05.2015., Dok. Nr. KQM7.028.002/6

Analīzes metode Water Purified Ph. Eur. Monogrāfija

Tehnisko izmaiņu konroles veidlapa




DOI: http://dx.doi.org/10.17770/het2016.20.3523

Refbacks

  • There are currently no refbacks.