1. Home

OPTIMIZATION OF PARAMETERS FOR LASER MARKING AND ENGRAVING ON PLYWOOD AND PINE WOOD MATERIALS

Artis Stanislavs Gusts, Imants Adijāns

Abstract


This publication shows the results of CO2 laser marking and engraving on plywood and pine materials at different speeds and powers. Plywood and pine materials were marked and engraved with four different speed and seven different power ratios. Marked and engraved line depth was measured for these materials. In this publication used SUNTOP CC-9060 CO2 laser machine and OLYMPUS OLS5000 laser microscope.

Keywords


CO2 laser; laser marking; laser engraving; plywood; pine

Full Text:

PDF

References


http://www.fao.org/3/ca7415en/ca7415en.pdf (13.04.2021)

Mechanical Properties of Wood, David W. Green, Jerrold E. Winandy, and David E. Kretschmann.

Study of laser cutting and marking on the filt with the help of a CO2-laser, Lazov Lyubomir, Dolchinkov Nikolay Todorov, Ivanov Jordan Shterev, 2019.

Application of the laser cutting of wood-containing materials in construction, A. T. Gabdrakhmanov, A. A. Bobrishev, L. N. Shafigullin, 2018.

https://www.epiloglaser.com/how-it-works/applications/wood-engraving.html (13.04.2021)

http://www.musterkiste.com/en/holz/pro/1029_Pine.html (14.04.2021)

Lydia Sobotova, Miroslav Badida, Laser marking as environment technology, 2017.

https://www.wood-database.com/scots-pine/ (12.04.2021)

https://www.probex.ee/berza_saplaksnis.html (12.04.2021)

http://www.matweb.com/search/datasheet_print.aspx?matguid=bd6620450973496ea2578c283e9fb807 (12.04.2021)




DOI: https://doi.org/10.17770/het2021.25.6795

Refbacks

  • There are currently no refbacks.
Rēzeknes Tehnoloģiju akadēmija, 2016 © Atbrīvošanas aleja 115, Rēzekne, Latvija. Tālrunis: 28325368;
Jautājumus un ierosinājumus sūtiet uz helpdesk@rta.lv