STRUCTURAL INVESTIGATION OF THE INTERMEDIATE LAYER IN A BIMETAL MILL ROLLER PRODUCED BY THE METHOD OF VERTICAL AXIS CENTRIFUGAL CASTING
DOI:
https://doi.org/10.17770/etr2021vol1.6533Keywords:
bimetal roller, centrifugal casting, mathematical modelAbstract
Subject of the investigation is a bimetallic mill roller with external, working layer from high chromium material and inner, supporting layer from ductile cast iron. The processes, accompanying the formation of a transition layer in bimetallic castings, produced by centrifugal casting have been investigated. Attention has paid to the structural changes in the transition zone, caused by the diffusion processes occurring during the casting and crystallization.
Downloads
References
L.Gushev, V.Valkov and I.Georgiev “Modelling of the defining technological parameters in obtaining of heat-resistant coatings on molds for centrifugal casting”, Sat. Scientific Papers, vol. IX, pp. 177-187, Sept. 1986.
G.Georgiev and I.Georgiev, “Mathematical modelling and computer simulation of two-component moulding”, Scientific Proceedings, year XXIII, vol. 2(165), June 2015.
G. Georgiev, I. Georgiev, P.Ivanov, St. Tsenov and I.Panayotov, "Mathematical modelling and optimization of technology for the formation of two-layer casting by the method of centrifugal casting", XXIV International Scientific and Technical Conference : FOUNDRY 2017 proceedings, April 5-7, 2017, Pleven, Sofia, Scientific-technical union of mechanical engineering “Industry-4.0”, 2018, pp23-28.
S. Yudin, M. Levin, and S. Rosenfeld, Centrifugal Casting part 1, Moscow, 1972.
I.Georgiev and V.Valkov, “Theoretical - experimental researches for determination of technological parameters at vertical axis centrifugal casting with of two-layer shaped castings”, Engineering Sciences, book 2, pp.86-94, Sept. 2011.
