EVALUATION OF THE GRAPHENE DISPERSIONS FOR KEVLAR FABRICS FUNCTIONALIZATION OBTAINED BY THE LIQUID-EXFOLIATION OF GRAPHITE

Authors

  • Ieva Bake Centre for Design and Technology, Institute of Arhitecture and Design, Riga Technical University; (LV)
  • Liga Rampane Centre for Design and Technology, Institute of Arhitecture and Design, Riga Technical University (LV)
  • Ilze Balgale Centre for Design and Technology, Institute of Arhitecture and Design, Riga Technical University (LV)
  • Silvija Kukle Centre for Design and Technology, Institute of Arhitecture and Design, Riga Technical University (LV)
  • Imants Adijans Rezekne  Academy of Technologies, Laser Technologies Research Center; (LV)

DOI:

https://doi.org/10.17770/etr2024vol1.7985

Keywords:

Dispersion, Graphene, Solvents, Zeta potential

Abstract

The process where pristine graphite is subjected to a solvent treatment seems simple and scalable and has attracted the attention of researchers over many years.  However, for successful exfoliation, overcoming the van der Waals attractions between the adjacent layers of graphite is necessary. Over time, several methods have been created to overcome the attraction between layers. Graphene’s liquid phase exfoliation (LPE) occurs due to the strong interactions between the solvent molecules and the basal planes of graphite, overcoming the energetic resistance to exfoliation and subsequent dispersion. Ultra sonication used for exfoliation can produce single or few layered graphene flakes. During sonication the sound waves propagate through liquid medium in alternating high- and low-pressure cycles, strong mechanical and thermal energy released by acoustic cavitation results in splitting up large particles into fine ones and dispersing them. Simultaneous insertion of solvent and/or intercalation molecules in between the graphite layers takes place supporting graphite separation into graphene layers. ; The dispersion capacity of graphene flakes depends on how appropriate the solvent properties are to the corresponding properties of graphene, such as surface tension, Hildebrand, and Hansen solubility parameters. Only certain solvents can disperse graphene well and form a dispersion appropriate for specific future applications. In addition, after exfoliation by ultra sonication graphene flakes aggregation due to the van der Waals attractions must be overcome to prepare in long-term stable dispersions of nanometres-size graphene sheets. ; The research has focused on the preparation of stable dispersion ready for transfer without intermediate processes to the Kevlar fabrics. An experimental comparison of the potentials of the 4 solvents for the application resulted in three corresponding to the intended use, two of them examined in detail, supplementing the composition of the LPE liquid medium with triethanolamine to obtain sufficient performance graphene coverage on Kevlar textile fibres.

Supporting Agencies
Project No. VPP-AIPP-2021/1-0009 of the Latvian National Research Programme: Defence Innovation Research Programme.

Downloads

Download data is not yet available.

References

Yang, M.; Cao, K.; Sui, L.; Qi, Y.; Zhu, J.; Waas, A.; Arruda, E.M.; Kieffer, J.; Thouless, M.; Kotov, N.A. Dispersions of aramid nanofibers: A new nanoscale building block. ACS Nano 2011, 5, 6945–6954.

Rafael A. Bizao, Leonardo D. Machado, Jose M. de Sousa, Nicola M. Pugno & Douglas S. Galvao. Scale Effects on the Ballistic Penetration of Graphene Sheets. 2018, Scientific Reports (nature.com).

Stankovich, S.; Dikin, D.A.; Dommett, G.H.; Kohlhaas, K.M.; Zimney, E.J.; Stach, E.A.; Piner, R.D.; Nguyen, S.T.; Ruoff, R.S. Graphene-based composite materials. Nature 2006, 442, 282. 33.

Georgakilas, V.; Otyepka, M.; Bourlinos, A.B.; Chandra, V.; Kim, N.; Kemp, K.C.; Hobza, P.; Zboril, R.; Kim, K.S. Functionalization of graphene: Covalent and non-covalent approaches, derivatives, and applications. Chem. Rev. 2012, 112, 6156–6214.

Ma, L.; Zhao, D.; Zheng, J. Construction of electrostatic and π–π interaction to enhance interfacial adhesion between carbon nanoparticles and polymer matrix. J. Appl. Polym. Sci. 2019, 137, 48633.

Kadir Bilisik and Mahmuda Akter. Graphene nanocomposites: A review on processes, properties, and applications. 2022, Journal of Industrial Textiles 51(3S) Vol. 51(3S) 3718S–3766S. DOI: 10.1177/15280837211024252.

D. G. Papageorgiou, I. A. Kinloch, and R. J. Young, “Mechanical properties of graphene and graphene-based nanocomposites,” Prog. Mater. Sci., vol. 90, pp. 75–127, 2017, doi: 10.1016/j.pmatsci.2017.07.004.

C. Vacacela Gomez et al., “The liquid exfoliation of graphene in polar solvents,” Appl. Surf. Sci., vol. 546, p. 149046, 2021, doi: https://doi.org/10.1016/j.apsusc.2021.149046.

M. Eredia, A. Ciesielski, and P. Samorì, “Graphene via Molecule-Assisted Ultrasound-Induced Liquid-Phase Exfoliation: A Supramolecular Approach,” .Phys. Sci. Rev., vol. 1, no. 12, pp. 55–57, 2016, doi: 10.1515/psr-2016-0101.

J. Shen et al., “Liquid Phase Exfoliation of Two-Dimensional Materials by Directly Probing and Matching Surface Tension Components”. Nano Lett., vol. 15, no. 8, pp. 5449–5454, Aug. 2015, doi: 10.1021/acs.nanolett.5b01842.

L. I. Silva, D. A. Mirabella, J. Pablo Tomba, and C. C. Riccardi, “Optimizing graphene production in ultrasonic devices”. Ultrasonics, vol. 100, p. 105989, Jan. 2020, doi: 10.1016/j.ultras.2019.105989.

R. Banavath, S. S. Nemala, R. Srivastava, and P. Bhargava, “Non-Enzymatic H2O2 Sensor Using Liquid Phase High-Pressure Exfoliated Graphene” .J. Electrochem. Soc., vol. 168, no. 8, p. 86508, Aug. 2021, doi: 10.1149/1945-7111/ac1eb6.

Lim, H. J., Lee, K., Cho, Y. S., Kim, Y. S., Kim, T., and Park, C. R. (2014). Experimental consideration of the Hansen solubility parameters of as-produced multi-walled carbon nanotubes by inverse gas chromatography. Phys. Chem. Chem. Phys. PCCP. 16, 17466–17472. doi: 10.1039/C4CP02319F).

C. M. Hansen, Hansen solubility parameters: A user’s handbook: Second edition. 2007. doi: 10.1201/9781420006834.

H. J. Salavagione et al., “Identification of high performance solvents for the sustainable processing of graphene”. Green Chem., vol. 19, no. 11, pp. 2550–2560, 2017, doi: 10.1039/c7gc00112f.

Tyurnina, Anastasia & Tzanakis, Iakovos & Morton, Justin & Mi, Jiawei & Porfyrakis, Kyriakos & Maciejewska, Barbara & Grobert, Nicole & Eskin, Dmitry. (2020). Ultrasonic exfoliation of graphene in water: A key parameter study. Carbon. 168. 10.1016/j.carbon.2020.06.029.

Anastasia V. Tyurnina, Justin A. Morton, Tungky Subroto, Mohammad Khavari, Barbara Maciejewska, Jiawei Mi, Nicole Grobert, Kyriakos Porfyrakis, Iakovos Tzanakis, Dmitry G. Eskin, Environment friendly dual-frequency ultrasonic exfoliation of few-layer graphene, Carbon, Volume 185, 2021, Pages 536-545, ISSN 0008-6223.

J. Sherwood et al.,“Dihydrolevoglucosenone (Cyrene) as a bio-based alternative for dipolar aprotic solvents”. Chem. Commun. (Camb)., vol. 50, no. 68, pp. 9650–9652, Sep. 2014, doi: 10.1039/c4cc04133j.

A. D. Curzons, D. C. Constable, and V. L. Cunningham, “Solvent selection guide: a guide to the integration of environmental, health and safety criteria into the selection of solvents”. Clean Technol. Environ. Policy, vol. 1, no. 2, pp. 82–90, 1999, doi: 10.1007/s100980050014.

S. Kukle, I. Bake, and L. Abele, “Graphene-containing para aramid fabric coating via surfactant assisted exfoliation of graphite”. Mater. Today Proc., vol. 97, pp. 44–51, 2024, doi:https://doi.org/10.1016/j.matpr.2023.09.131.

O'Neill A. 'Liquid phase exfoliation of two dimensional crystals', [thesis], Trinity College (Dublin, Ireland). School of Physics, 2013, pp 158.

Yi, M.; Shen, Z.; Zhang, X.; Ma, S. Achieving Concentrated Graphene Dispersions in Water/Acetone Mixtures by the Strategy of Tailoring Hansen Solubility Parameters. J. Phys.D: Appl. Phys. 2013, 46, 025301.

Kai Ling Ng, Barbara M Maciejewska, Ling Qin, Colin Johnston, Jesus Barrio, Maria-Magdalena Titirici, Iakovos Tzanakis, Dmitry G Eskin, Kyriakos Porfyrakis, Jiawei Mi, and Nicole Grobert. Direct Evidence of the Exfoliation Efficiency and Graphene Dispersibility of Green Solvents toward Sustainable Graphene Production. ACS Sustainable Chem. Eng. 2023, 11, 58−66.

“ISO 22412:2017 - Particle size analysis — Dynamic light scattering (DLS)”.

A.Raja, Pavan; Barron, “Physical Methods in Chemistry and Nano Science”. OpenStax CNX, 2019, [Online]. Available: https://espanol.libretexts.org/Quimica/Química_Analítica/Métodos_Físicos_en_Química_y_Nano_Ciencia_(Barron)/01%3A_Análisis_Elemental/1.04%3A_Introducción_a_la_Espectroscopia_de_Absorción_Atómica.

A. Fulinski, “On Marian Smoluchowski’s life and contribution to physics” .Acta Phys. Pol. B, vol. 29, no. 6, pp. 1523–1537, 1998.

L. Ābele, I. Baķe, L. Vilcēna, and S. Kukle, “Development of Graphene-Based Functional Coating for the Surface Modification of Textiles”. Mater. Sci. Forum, vol. 1104, pp. 77–85, Nov. 2023, doi: 10.4028/p-i7kXSV.

Downloads

Published

2024-06-22

How to Cite

[1]
I. Bake, L. Rampane, I. Balgale, S. Kukle, and I. Adijans, “EVALUATION OF THE GRAPHENE DISPERSIONS FOR KEVLAR FABRICS FUNCTIONALIZATION OBTAINED BY THE LIQUID-EXFOLIATION OF GRAPHITE”, ETR, vol. 1, pp. 70–77, Jun. 2024, doi: 10.17770/etr2024vol1.7985.