INVESTIGATION OF THE INFLUENCE OF ARTIFICIAL AGING PARAMETERS ON THE MICRO AND MACRO HARDNESS OF ALSI12CU5MGCR AND ALSI12CU5MN ALLOYS
DOI:
https://doi.org/10.17770/etr2024vol3.8103Keywords:
eutectic aluminium-silicon alloys, heat treatment, microhardness, macrohardnessAbstract
Non-standard aluminium-silicon alloys of the eutectic type are complexly modified. The alloys were subjected to T6 heat treatment at different artificial aging parameters. The influence of the working parameters of the dispersion hardening process on the microhardness of the α-solid solution and the macrohardness of the alloys was investigated. The influence of alloying elements on the phase composition of the alloys is discussed.
Downloads
References
G.B. Stroganov, B.A.Rotenberg and G.B.Gershman, „Alloys of aluminum with silicon“, 1977 (In Russian)
N.M. Siddesh Kumar, Dhruthi, G.K. Pramod, P. Samrat, M. Sadashiva, „A Critical Review on Heat Treatment of Aluminium Alloys“, Materials Today: Proceedings, Vol. 58, 2022, рр. 71-79 https://doi.org/10.1016/j.matpr.2021.12.586
F. Paray, J.E. Gruzleski, „Modification—a Parameter to Consider in the Heat Treatment of Al-Si Alloys“, Cast Metals,Vol.5,1992,https://doi.org/10.1080/09534962.1992.11819112
S. Menargues, E. Martín, M.T. Baile, J.A. Picas, „New short T6 heat treatments for aluminium silicon alloys obtained by semisolid forming“, Materials Science and Engineering: A, Vol.621,2015,рр.236-242 https://doi.org/10.1016/j.msea.2014.10.078
M.A. Azmah Hanim, S. Chang Chung, O. Khang Chuan, „Effect of a two-step solution heat treatment on the microstructure and mechanical properties of 332 aluminium silicon cast alloy“, Materials & Design, Vol. 32, 2011, рр. 2334-2338 https://doi.org/10.1016/j.matdes.2010.12.040
M.M Haque, M.A Maleque, „Effect of process variables on structure and properties of aluminium–silicon piston alloy“, Journal of Materials Processing Technology, Vol.77, 1998, рр. 122-128 https://doi.org/10.1016/S0924-0136(97)00409-3
E. Sjölander, S. Seifeddine, „The heat treatment of Al–Si–Cu–Mg casting alloys“, Journal of Materials Processing Technology, Vol. 210, 2010, рр. 1249-1259 https://doi.org/10.1016/j.jmatprotec.2010.03.020
D. K. Dwivedi,R. Sharma, A. Kumar, „Influence of silicon content and heat treatment parameters on mechanical properties of cast Al–Si–Mg alloys“, International Journal of Cast Metals Research, Vol. 19, 2006, рр. 275-282 https://doi.org/10.1179/136404606X153867
P.A. Rometsch, Y. Zhang, S. Knight, „Heat treatment of 7xxx series aluminium alloys—Some recent developments, Transactions of Nonferrous Metals Society of China, Vol. 24, 2014, рр. 2003-2017 https://doi.org/10.1016/S1003-6326(14)63306-9
P. Cavaliere, E. Cerri, P. Leo, „Effect of heat treatments on mechanical properties and damage evolution of thixoformed aluminium alloys“, Materials Characterization, Vol. 55, 2005, рр. 35-42 https://doi.org/10.1016/j.matchar.2005.02.006
R. Sharma, Anesh, D.K. Dwivedi, „Influence of silicon (wt.%) and heat treatment on abrasive wear behaviour of cast Al–Si–Mg alloys“, Materials Science and Engineering: A, Vol. 408, 2005, рр. 274-280 https://doi.org/10.1016/j.msea.2005.08.013
A.A. Canales, E. Carrera, J. Talamantes-Silva, S. Valtierra, R. Colás,“ Mechanical properties in as–cast and heat treated Al–Si–Cu alloys“, International Journal of Microstructure and Materials Properties, Vol. 7, 2012, pp. 281-300 https://doi.org/10.1504/IJMMP.2012.048518
R.N. Lumley, R.G. O'Donnell, D.R. Gunasegaram, T. Kittel-Sherri, M. Gershenzon, A.C Yob, I.J. Polmear, „The role of alloy composition in the heat treatment of aluminium high pressure die castings“, Metallurgical Science and Tecnology, Vol. 26, 2008
T.O. Mbuya, B.O. Odera, S.P. Ng'ang'a, „Influence of iron on castability and properties of aluminium silicon alloys: literature review“, International Journal of Cast Metals Research, Vol. 16, 2003, рр. 451-465 https://doi.org/10.1080/13640461.2003.11819622
M. A. Moustafa, F. H. Samuel, H. W. Doty, “ Effect of solution heat treatment and additives on the microstructure of Al-Si (A413.1) automotive alloys“, Journal of Materials Science, Vol. 38, 2003, pр. 4507–4522
F. Lasagni, B. Mingler, M. Dumont, H. P. Degischer, „Precipitation kinetics of Si in aluminium alloys“, Materials Science and Engineering: A, Vol. 480, 2008, рр. 383-391 https://doi.org/10.1016/j.msea.2007.07.008
E. Ogris, A. Wahlen, H. Lüchinger, P.J. Uggowitzer, „On the silicon spheroidization in Al–Si alloys“, Journal of Light Metals, Vol. 2, 2002, рр. 263-269 https://doi.org/10.1016/S1471-5317(03)00010-5
O. Dezellus, M. Zhe, F. Bosselet, D. Rouby, J.C. Viala, „Mechanical testing of titanium/aluminium–silicon interface: Effect of T6 heat treatment“, Materials Science and Engineering: A, Vol. 528, 2011, рр. 2795-2803 https://doi.org/10.1016/j.msea.2010.12.036
M. Farokhpour, M. S. A. Parast, M. Azadi, „ Evaluation of hardness and microstructural features in piston aluminum-silicon alloys after different ageing heat treatments“, Results in Materials,Vol.16,2022 https://doi.org/10.1016/j.rinma.2022.100323
N. A. Aristova, I. F. Kolobnev, “Thermal treatment of cast aluminum alloys”, 1977 (In Russian)
А. Guinier, „Heterogeneous metallic solid solutions”, 1962
R. Slavov, M. Manolov, V. Atanasova,“ Handbook of casting of non-ferrous metals and alloys“, 1976 (In Bulgarian)
Mahle GmbH „Piston materials. In: Pistons and engine testing“. ATZ/MTZ-Fachbuch. Vieweg+Teubner Verlag, Wiesbaden.201 https://doi.org/10.1007/978-3-8348-8662-0_4
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Boyan Dochev, Desislava Dimova, Mihail Zagorski, Plamen Kasabov, Bozhana Chuchulska
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.