RESEARCH OF ROBOTIC SYSTEM POSITIONING ACCURACY

Authors

  • Paulius Sakalys Faculty of electronics and informatics, Vilniaus Kolegija/Higher Education Institution (LT)
  • Loreta Savulioniene Faculty of electronics and informatics, Vilniaus Kolegija/Higher Education Institution (LT)
  • Dainius Savulionis Faculty of electronics and informatics, Vilniaus Kolegija/Higher Education Institution (LT)
  • Anastasiya Chupryna Software engineering department, Kharkiv National University of Radio Electronics (UA)
  • Kyrylo Smelyakov Software engineering department, Kharkiv National University of Radio Electronics (UA)

DOI:

https://doi.org/10.17770/etr2024vol3.8156

Keywords:

feedback, robotic system, servo drive

Abstract

Robotics is one of the technologies of the fourth industrial revolution, which has a wide range of applications, from household chores to manufacturing and healthcare to entertainment and space exploration. The purpose of the study is to determine and evaluate the repeatability and positioning accuracy indicators of the robotic system when reproducing the movements of the hand repeating a human hand. The article conducts a comparative analysis of the methods and software control algorithms for creating feedback of robotic system electromechanical control gears displacement, and provides the rationale for the choice of physical equipment for the technical experiment. This article describes the plan of stages of the experimental research, the research bench, presents the systematized results of the research, conclusions and suggestions for practical application.

Downloads

Download data is not yet available.

References

Aragon-Jurado D., Morgado-Estevez A., Perez-Peña F. 2018a. Low-cost servomotor driver for PFM control, Sensors (Switzerland) 18(1). DOI: 10.3390/s18010093

Debnath D., Malla P., Roy S. 2022. Position control of a DC servo motor using various controllers: A comparative study, Materialstoday: ProceedingsVolume 58, Part1: 484-488. DOI: https://doi.org/10.1016/j.matpr.2022.03.008

Garcia-Barragan 2017. An Engineering Guide to Position and Speed Feedback Devices for variable speed drives and servos. Online acess: www.controltechniques.com.

Jurando, D.A, Estevez, A.M., Pena, F.P. 2018. Low-Cost Servomotor Driver for PFM Control, MDPI and ACS, Sensors. DOI: https://doi.org/10.3390/s18010093.

Lynn, T. T. 2016. Position control of DC servo drive by fuzzy logic controller in flat-bed screen printing machine, American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS), Volume 26, No 1: 8-19

Smelyakov, K., Chupryna, A., Sandrkin, D., Kolisnyk, M. 2020. Search by Image Engine for Big Data Warehouse. IEEE Open Conference of Electrical, Electronic and Information Sciences (eStream). DOI: https://doi.org/10.1109/eStream50540.2020.9108782

Smelyakov, K., Karachectsev D., Kulemza, D., Samoilenko, Y., Patlan, O., Chupryna, A. 2020. Effectiveness of Preprocessing Algorithms for Natural Language Processing Applications. IEEE International Conference on Problems of Infocommunications. Science and Technology (PIC S&T). DOI: https://doi.org/10.1109/PICST51311.2020.9467919

Veitschegger W.K., Wu C.-H. 1988. Robot Calibration and CompensationPrieiga per internetą: https://ieeexplore.ieee.org/abstract/document/9302.

Zhang D., Wang J., Qian L., Yi J. 2019. Stepper motor open-loop control system modeling and control strategy optimization, Archives of Electrical Engineering 68(1): 63–75. DOI: 10.24425/aee.2019.125980 .

Zhu W.H., Lamarche T. 2007. Velocity estimation by using position and acceleration sensors, IEEE Transactions on Industrial Electronics 54(5): 2706–2715. DOI: 10.1109/TIE.2007.899936

Downloads

Published

2024-06-22

How to Cite

[1]
P. Sakalys, L. Savulioniene, D. Savulionis, A. Chupryna, and K. Smelyakov, “RESEARCH OF ROBOTIC SYSTEM POSITIONING ACCURACY”, ETR, vol. 3, pp. 279–282, Jun. 2024, doi: 10.17770/etr2024vol3.8156.