COOLING GLOVE COMPARTMENT OF A VEHICLE BY THERMOELECTRIC COOLERS

Authors

  • Çiğdem Susantez Engineering Faculty, Department of Mechanical Engineering, Trakya University (TR)
  • Hilmi Kuşçu Engineering Faculty, Department of Mechanical Engineering, Trakya University (TR)
  • Kamil Kahveci Engineering Faculty, Department of Mechanical Engineering, Trakya University (TR)

DOI:

https://doi.org/10.17770/etr2024vol3.8164

Keywords:

Boussinesq approximation, glove compartment, natural convection, thermoelectric cooler

Abstract

In this study, effects of the four different thermoelectric cooler (TEC) placements on the boundaries of the glove compartment have been numerically investigated under the effect of natural convection with Boussinesq approximation. The best cooling capacity has been observed for the top boundary TEC application for the investigated glove compartment geometry. It has also been observed that heat transfer is stronger at the beginning of the process as a result of the stronger convection currents. The absorbed heat from the glove compartment increases with the increase of the electric current applied.

 

Downloads

Download data is not yet available.

References

W. He, G. Zhang, X. Zhang, J. Ji, G. Li and X. Zhao, "Recent development and application of thermoelectric generator and cooler," Appl. Energy, vol. 143, pp. 1-25, 2015. https://doi.org/10.1016/j.apenergy.2014.12.075

T. Guclu and E.Cuce, "Thermoelectric coolers (TECs): From theory to practice," J. Electron. Mater., vol. 48, No. 1, pp. 211-230, 2019. https://doi.org/10.1007/s11664-018-6753-0

Y. A. Çengel and M. A. Boles, Thermodynamics an Engineering Approach New York: McGraw-Hill, 2015.

B. S. Mann, "Transverse thermoelectric effects for cooling and heat flux sensing," M.S. thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, U.S.A., 2006.

H. Kuşçu, K. Kahveci and B. T. Tanju, "Natural convection in a square enclosure cooled by peltier effect" presented and published in Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering (MCM 2015), Barcelona, Spain, July 20-21, 2015.

Y. Zhou and J. Yu, "Design optimization of thermoelectric cooling systems for applications in electronic devices," Int. J. Refrig., vol. 35, pp. 1139-1144, 2012. https://doi.org/10.1016/j.ijrefrig.2011.12.003

A. Sarkar and S. K. Mahapatra, "Role of surface radiation on the functionality of thermoelectric cooler with heat sink," Appl. Therm. Eng., vol. 69, pp. 39-45, 2014. https://doi.org/10.1016/j.applthermaleng.2014.04.025

S. P. Yushanov, L. T. Gritter, J. S. Crompton and K. C. Koppenhoefer, "Multiphysics Analysis of Thermoelectric Phenomena" presented and published in Proceedings of the 2011 COMSOL Conference, Boston, U.S.A., October 13-15, 2011.

Z. Chen, M. Liao, X. Hu, Y. Ma, S. Jiang, X. Chen, F. Zou, X. Fan and Z. He, "Study on the performance of thermoelectric refrigerator under natural convection heat transfer condition," Appl. Therm. Eng., vol. 230, part B, pp. 1-9, 2023. https://doi.org/10.1016/j.applthermaleng.2023.120822

F. Jiang, F. Meng, L. Chen and Z. Chen, "Thermodynamic analysis and experimental research of water-cooled small space thermoelectric air-conditioner," J. Therm. Sci., vol. 31, no. 2, pp. 390-406, 2022. https://doi.org/10.1007/s11630-022-1575-z

H. Kuşçu and K. Kahveci, "Experimental study of heat transfer in a container filled with water and cooled by a peltier device" presented and published in Proceedings of the 2nd World Congress on Mechanical, Chemical, and Material Engineering (MCM’16), Budapest, Hungary, August 22-23, 2016. DOI: 10.11159/htff16.118

Y. A. Çengel, Heat and Mass Transfer A Practical Approach. New York: McGraw-Hill, 2006.

HB Corporation Thermoelectric Cooler TEC1-12730, “Performance Specifications,” Rev 2.03. Available: https://datasheetspdf.com/pdf-file/564497/HB/TEC1-12730/1. [Accessed: March 13, 2024].

Downloads

Published

2024-06-22

How to Cite

[1]
Çiğdem Susantez, H. Kuşçu, and K. Kahveci, “COOLING GLOVE COMPARTMENT OF A VEHICLE BY THERMOELECTRIC COOLERS”, ETR, vol. 3, pp. 306–311, Jun. 2024, doi: 10.17770/etr2024vol3.8164.