Investigation of Biomass Ash Properties for Their Utilization Assesment


  • Gotfrids Noviks Rezeknes Augstskola



biomass ashes, specific free surface, adsorption capacity, physical properties of ashes


Ash is a mineral waste group, which quantity increases on a global scale and now it has achieved hundreds of millions of tons, and as they are an integral part of the any solid fuel, including biomass the production rate will continue. At the same time ash, due to their nature and composition is a unique material that can be valuable technogenic resource. The paper studies the wood ash physical properties (density, porosity, specific free surface) composition and the metal adsorption ability. It was found that wood ash contains a significant percentage of metals in the mobile phase, which dissolve in the water and thus are able to spread into the surrounding soil. The study established a high adsorption activity of ash (95-99%) to the metals. It was found that the adsorption capacity of the ash is possible to increase with the activation of the ash particle surfaces and changing the pore structure.


Download data is not yet available.

Author Biography

  • Gotfrids Noviks, Rezeknes Augstskola
    Faculty of Engineering, Department of Natural and Engineering Sciences


Jan Kalembkiewicz,Urszula Chmielarz, “Ashes from cocombustion of coal and biomass: New industrial waste”, in Resources, Conservation and Recycling,vol. 69, December 2012, pp. 109–121

Smriti Singh, Reginald E. Masto, Santosh K. Verma“, A comparative evaluation of minerals and trace elements in the ashes from lignite, coal refuse, and biomass fired power plants”, in International Journal of Coal Geology,Vol. 87, Issue 2, 1 August 2011, pp.112–120

B.M. Steenari,S. Schelander, O. Lindqvist,” Chemical and leaching characteristics of ash from combustion of coal, peat and wood in a 12 MW CFB – a comparative study” in Fuel, Volume 78, Issue 2, January 1999, pp. 249–258

A.M. Grishin, A. N. Golovanov, Ya. V. Sukov, “Experimental study of peat ignition and combustion”,in Journal of Engineering Physics and Thermophysics,May 2006

Bahor, M.P.; McLaren, R.J.; Niece, J.E.; Pedersen, H.C., Coal ash disposal manual: second edition. Final report, EPRI-CS- 2049,1981Larry L. Baxter, “Ash deposition during biomassand coal combustion: A mechanistic approach” in Biomass and Bioenergy, Volume 4, Issue 2, 1993,pp. 85-102

Misra M.K., Ragland K.W., Baker A.J. "Wood ash composition as a function of temperature furnace".in Biomass and Bioenergy 4 (2): 103rd doi: 10.1016/0961-9534 (93) 90032-Y,1993.

Adrian K. James, Ronald W. Thring, Steve Helle and Harpuneet S. Ghuman, “Ash Management Review—Applications of Biomass Bottom Ash”, in Energies , 5, 2012,pp.3856-3873.

Mary B. Ogundiran, Joshua O. Babayemi, and Chima G. Nzeribe.Determination of metal content and an assessmentof the potential use of waste cashew nut ash (cnsa)as a source for potash production”,in BioResources,6(1), 2011,pp.529-536.

Xiao, Ruirui,Chen, Xueli,Wang, Fuchen,Yu, Guangsuo “ The physicochemical properties of different biomass ashes at different ashing temperature”,in Renewable Energy: An International Journal, vol. 36 Issue 1, 2011,pp.244

Vassilev, Stanislav V. Baxter, DavidAndersen, Lars K.Vassileva, Christina G. “An overview of the composition and application of biomass ash: Part 2. Potential utilisation, technological and ecological advantages and challenges”, in Fuel., vol. 105, 2013,pp.19-39.

Richard A.Kruger, Mark Hovy and David Wardle,”The use of fly ash fillers in rubber”, International Ash Utilization Symposium, Center for applied energy research, University of Kentucky, paper #72, 1999.

Carlos Leiva, Luis F. Vilches, Xavier Querol, Jose Vale, Constantino Fernandez Pereira,”Use of zeolitised fly ash in fire resistant plates “,in World of Coal Ash,, Kentucky, USA, May 7-10, 2007

Xavier Querol,Juan C.Umana,Felicia Plana, Andres Alastuey, Angel Lopez-Soler, Alejandro Medinaceli, Antonio Valero, Manel J. Domingo, Ezequiel Garcia-Rojo, “Synthesis of zeolites from fly ash in a pilot plant scale. Examples of potential environmental applications, in International Ash Utilization Symposium, Center for applied energy research, University of Kentucky, paper #12, 1999.

Yoshitaka Ishikawa, “A study on a technology t produce inorganic fibers by melting coal ash”.

Ola C. Holmstrom and Christopher. Swan,”Geotechnical properties of innovative, synthetic lightweight aggregates” International Ash Utilization Symposium, Center for applied energy research, University of Kentucky, paper #49, 1999.

oa u n Capablo, Peter Arendt Jensen, Kim Hougaard Pedersen, Klaus Hjuler, Lars Nikolaisen, Rainer Backman, and Flemming Frandsen,”Ash properties of alternative biomass”,in Energy & Fuels 23 (4), 2009,pp.1965-1976.

Felix F. Udoeyo; Hilary Inyang; David T. Young; and Edmund E. Oparadu“Potential of wood waste ash as an additive in concrete” in Journal of Materials in Civil Engineering, Vol. 18, No. 4,, 2006. 605

O. B. Orori, L. Etie´ gni, K. Senelwa, M. M. Mwamburi, K. B. Balozi,G. K. Barisa and E. S. Omutange,“Electro-coagulation treatment efficiency of graphite,iron and aluminum electrodes using alum and wood ash electrolytes on a Kraft pulp and paper mill effluent”,in Water science and technology 62.7, 2010 pp.1526-1535

M. Ahmaruzzaman,”Role of fly ash in the removal of organic pollutants from wastewater”in Energy & Fuels, 23 (3), 2009.pp.1494-1511

Mario Berra, Giancarlo De Casa, Marcello Dell’Orso, Luigi Galeotti, Teresa Mangialardi, Antonio Evangelista Paolini, Luigi Piga,”Reuse of woody biomass fly ash in cement-based materials: leaching tests” in Recycling of Biomass Ashes, Springer, 2011 pp.132-146

Ek.Serafimova, M.Mladenov,I.Mihailova,Y.Pelovski,”Study on the characteristics of waste wood ash”, in Journal of the University of Chemical Technology and Metallurgy, 46,1, 2001, pp.31-3

Guoliang Wang, Laihong Shen, and Changdong Sheng “Characterization of biomass ashes from power plants firing agricultural residues”in Energy & Fuels 26 (1), 2012,pp.102- 111

Wang, Shuangzhen,Miller, Amber,Llamazos, Emilio, Fonseca, Fernando,Baxter, Larry “Biomass fly ash in concrete: Mixture proportioning and mechanical properties” in Fuel. Vol. 87 Issue 3, 2008. pp.365-371.

Vassilev,S.V., Baxter,D.,Andersen,L.K., Vassileva, C.G. Ān overview of the organic and inorganic phase composition of biomass”,in Fuel , 2012,

V.Čepanko, P.Baltrenas,”Investigation natural zeolite and wood ash effects on carbon and nitrogen content in grain residue compost”, in Pol.J.Environ.Stud.,vol.20, No.6,2011, pp.1411-1418.

Katja Schiemenz, ürgen Kern, Hans-Marten Paulsen, Silvia Bachmann, Bettina Eichler-Löbermann” Phosphorus Fertilizing Effects of Biomass Ashes”,in Recycling of Biomass Ashes, 2011, pp 17-31

Graphite. Methods for determination of specific surface, GOST 13144-79

Xavier Querol, Juan C. Umana, Andres Alastuey, Carles Ayora, Angel Lopez-Soler, Felicia Plana,”Extraction of major soluble impurities from fly ash in open and closed leaching systems”, in International Ash utilization symposium, Center for applied energy research, University of Kentucky, paper #11, 1999.

Jaworek, Anatol Czech, Tadeusz Sobczyk, Arkadiusz T. Krupa, Andrzej“ Properties of biomass vs. coal fly ashes deposited in electrostatic precipitator”in Journal of Electrostatics., vol. 71 Issue 2, 2013,p.p.165-175.

Tariq Mahmood, Salman Akbar Malik, and Syed Tajammul Hussain “Biosorption and recovery of heavy metals from aqueous solutions by eichhornia crassipes (water hyacinth) ash”,in BioResources 5(2), 2010,pp.1244-1256.

Stylianos Liodakis, Magdalini Tsoukala, Georgios Katsigiannis”Laboratory study of leaching properties of Mediterranean forest species ashes” in Water, Air, and Soil Pollution,vol. 203, Issue 1-4,2009, pp. 99-107

Mika Nieminen, Sirra Piirainen, Mikko Moilanen,”Release of mineral nutrients and heavy metals from wood and peat ash fertilizers : Field studies in Finnish forest soils”, in Scandinavian Journal of Forest Research, 20, 2005, pp.146-153.




How to Cite

G. Noviks, “Investigation of Biomass Ash Properties for Their Utilization Assesment”, ETR, vol. 1, pp. 168–174, Aug. 2015, doi: 10.17770/etr2013vol1.821.